The Secret to Energy and Cost Savings: Pump System Evaluation

What if commercial builders, utilities, and other fluids engineers could unlock 162.9 terawatt-hours of energy savings and subsequent cost savings of $14.6 billion? According to the EPA’s greenhouse gas equivalency calculator, that greenhouse savings would represent carbon sequestered by more than 1.9 billion tree seedlings grown for 10 years. It’s equivalent to the CO2 emissions from more than 12.9 billion gallons of gas consumed and a year’s worth of electricity for more than 13 million homes. That potential lives in the pump systems that heat and cool buildings, generate power, run industrial plants, and irrigate farms. By re-evaluating current pump systems and implementing more energy-efficient solutions, companies can generate long-term savings without sacrificing reliability.

Energy and cost savings will vary depending on a variety of factors for different settings, but properly selecting pumps and ensuring they have an HI Energy Rating Label will increase the savings. For example, utilizing water pumps with an HI Energy Rating of 50, in a typical mid-sized commercial building using 20 pumps with an average 15-hp rating, you could expect to see a savings of 411,000 kWh per year, or $37,000 per year. In an industrial building using 40 pumps with an average 15-hp rating, you could see a savings of over 1.3 million kWh per year, equating to an approximate savings of $117,000 per year.

These savings can be even more significant when calculated alongside other pump systems within the same building or application, leading to significant cost and energy savings to help meet business and sustainability goals. Don’t assume that the process is daunting, however. Determining the right pump to save energy in a given application can be broken down into three general steps.

Step 1: Analyze the Requirements of a System – Not just a Single Pump

First, it is important to understand that all pumps are selected to meet system requirements —never the other way around. Once the application is determined, engineers can assess criteria, which varies greatly between different uses. For example, a hydraulic heating pump intended to circulate water will require different flow rates and attributes than water distribution pumps in residences or businesses. The energy consumption required for any system depends on the flow rate of the entire system including the pressure (head) and how often the pump(s) are operating.

By reviewing the entire system and not just the individual pump, engineers and specifiers lay the foundation to select the right pump or system for the application and the proper control methodologies to manage the flow of energy and ensure reliability. The most important question to ask at this juncture is, “How much flow/pressure does the system need and how often does it need it?”

Step 2: Identify Optimization Opportunities and Plot the Curve

To be accurate in the determination of energy consumption, the next step is to evaluate opportunities for efficiency gains in system flow, pressure/head, and pump, motor or drive efficiency, and operating time. In existing systems, the energy requirements can be measured over time as a benchmark to aid in identifying where energy consumption can be optimized.

The time period for this process may need to account for seasonal variations, so an entire year may be needed. In contrast, a batch process for a system’s specific task (e.g. provide 100 gallons per minute (gpm) of water around a reactor to maintain 200 degrees Fahrenheit for one hour), will be a much shorter benchmark because the periodic operation is known and consistent.

In another example, a building may need more heat or cooling when it is occupied during business hours and less when business is closed. Multiple thermostats in that building may require different flows at different times, meaning the needs can vary on certain days and during different times of day.

To plot the system head curve (how system pressure varies with flow rate) in the system, map how system flow rate and head changes within the system over periods of time. During this process, it is important to understand if and how controls are maintaining the flow and pressure in the system because the control method is typically key to optimizing the system. This will enable decision makers to select the pump based on system requirements.

Then, overlay the pump curve and the system curve to determine if multiple pumps vs. a single pump, variable speed, or a booster pump, for example, is needed. For example, a water distribution operation has a different system curve than pumps used for building heating and cooling. Or, if the need is to pump a large volume of water to primarily overcome an elevation difference, variable speed pumping may not be cost effective, but instead a larger low-speed pumping option may be best. There are different strategies to most efficiently and reliably handle varying loads, such as adding a lower flow pump to meet part load operations, with one or more larger pumps with control logic to stage the pumps to meet the full load operations.

This three-step process is a framework for any decision maker to help evaluate their current system, identify opportunities for improved efficiency and realize energy and cost savings over time to help meet broader sustainability and energy management goals.

Source：https://www.achrnews.com/articles/143908-the-secret-to-energy-and-cost-savings-pump-system-evaluation