Air compressors widely used in the steel industry

The picture above shows the V-3/350 high-pressure air compressor manufactured by EboomYa This model product mainly provides users with a dry high-pressure air source with a nominal volume flow of 3m3/min and a rated exhaust pressure of 35MPa. This product is mainly composed of a V-shaped high-pressure air compressor, a motor, and a safety valve. The overall design is compact and small in size. , Light weight, easy to install and transport. After the unit is installed in place, the unit will start to run after starting the unit and supply air to the downstream.

In the overall design of the unit, an integrated design is adopted, and all equipment is installed on a common chassis, and the convenience of operation and maintenance is fully considered, and the overall layout is reasonable. The power of the compressor unit is an electric motor. The piston machine is connected with the motor through a coupling. Each cooler and host in the system are all water-cooled to meet the heat exchange requirements of the unit. In order to ensure the high reliability requirements of the unit performance, the high-pressure piston compressor absorbs the advanced technology of the same industry at home and abroad on the basis of the introduction of foreign high-pressure compressor technology, and independently develops products. The motor is selected from domestic well-known brand motors. The machine has the characteristics of high degree of automation, stable operation, simple operation and high reliability. It adopts manual and automatic sewage discharge. The operation of the unit is controlled by pressure transmitter and platinum thermal resistance. One to five-stage coolers ensure normal operation and gas transmission. The spiral oil-water separator can separate the moisture from the compressed gas. The start control cabinet controls the start, stop and touch screen display of the compressor. The compressor pipeline is equipped with multiple protections such as pressure transmitter, platinum thermal resistance and exhaust safety valve to ensure the safe and reliable operation of the unit.

This unit mainly has the following characteristics:

1) The host adopts V structure, which has the advantages of small size, light weight, large displacement and high reliability.

2) The unit adopts five-stage compression and water-cooled cooling, so the pressure at each level is relatively low, and the cooling effect is good, which ensures that the unit has a low exhaust temperature and can operate safely and reliably for a long time.

3) Make full use of the characteristics of the piston compressor to compress high-pressure gas to meet the requirements of high-pressure compression, and the cylinder of the high-pressure piston machine is already small, so it is more convenient to maintain and replace the wearing parts.

4) The high pressure stage cooler adopts our company's patented technology, with high pressure bearing, simple structure, safe and reliable. The unit has a high degree of automation, is convenient to start and stop, and is easy to operate and use.

We guarantee to provide the most favorable price, the most complete service and the most convenient logistics for the same product.

Here is more compressor information you want.