Description: After dust and water removal by pre-filter, the mouth gas (coal-bed gas) adsorbs the water in the natural gas in the adsorption tower by using the adsorbent in the low temperature superstrong water absorption characteristic, and then removes the dust through the post-filter to achieve the goal of purifying the natural gas. When the ads1
Description: After the natural gas passes through the pre-filter to remove dust and water, in the adsorption tower, the water in the natural gas is adsorbed by the adsorbent in the low temperature super water absorption characteristic, and then the natural gas is purified through the post-filter to remove dust. When the adsorbents in one tower reac1
Description: At a certain temperature, carbon reacts with the residual oxygen in nitrogen to produce carbon dioxide. The carbon dioxide and water are removed by pressure swing adsorption process. After purification, the purity of nitrogen is more than 99.99% , the content of carbon dioxide is less than 4 PPM, and the content of oxygen is less than 1
According to the pressure swing adsorption principle, the use of zeolite molecular sieve as adsorbent, due to the characteristics of selective adsorption zeolite molecular sieve, nitrogen adsorption by zeolite molecular sieve, oxygen is enriched in the gas phase, under the action of pressure swing adsorption, oxygen and nitrogen separation. The sys1
Pressure swing adsorption nitrogen production equipment is based on its adsorbent (carbon molecular sieve) under different pressure adsorption capacity changes to obtain nitrogen equipment. Under a certain pressure, when air passes through the screening bed, the expansion rate of oxygen on the surface of the carbon molecular sieve is much higher th1
High temperature/high pressure gas filter is suitable for special working conditions, to meet the large working pressure and temperature. The operating pressure range is 25 -- 400bar, and the operating temperature range is 80 -- 600℃, and the high record of safety and reliability has been obtained in this range.
The microporous membrane gas filter is designed and manufactured according to GMP standard. The shell is made of imported stainless steel (304/316L) material, which has the advantages of high efficiency, energy saving, safety and reliability. It is widely used in the purification of fermentation air, injection air and inert gas. It is designed for 1
Compressed air filters are mainly used to filter impurities such as dust, metal wear and dirt, condensate, lubricants, acid condensate, oil mist and hydrocarbons in compressed air systems. The filter shell is made of high quality aluminum alloy and carbon steel, processed by advanced technology, and the outer surface is electrostatic sprayed with e1
In processes such as gas processing, petroleum refining and chemical processing, clean and fog-free gases are critical to the reliability and economic efficiency of equipment.
After the natural gas containing impurities enters the filter, the efficiency of the first stage filtration is achieved through the backflow rod, so that the large particle impurities are separated under the collision. At the same time, it also avoids the damage caused by the direct impact of natural gas on the filter element. The separated natural1
Unite cyclone separator is a single stage equipment. At the inlet of a separation section, a small diameter cyclone or blade removes liquid and solid particles using the dynamic action of centrifugal force and gravity. By removing most of the entrained fluid at this stage, unite's design increases the life of the highly condensed element and keeps 1
Filter separators are economical, efficient and efficient in removing large and small solid and liquid particles from gas streams. This can help protect the efficiency of valuable mechanical equipment optimization processes.