Introduction:
The nitrogen compressor produced by our company mainly provides users with a high-pressure nitrogen source. This product is mainly composed of W-type compressor host, motor, safety valve, etc. The overall design is compact, small in size, light in weight, and easy to install and transport. After the unit is installed in place, the unit will start to operate and supply gas downstream.
Features:
This type of equipment has high reliability, small size, light weight, high degree of automation, convenient operation, Stable air supply,low mechanical vibration and low noise.
Technical Parameters:
Technical Parameters
|
Type
|
W-type, reciprocating piston compressor
|
Nominal volume flow
|
0.3-30Nm3/min
|
Suction pressure
|
0-16MPa
|
Exhaust pressure
|
0.1-50MPa
|
Suction temperature
|
5~45℃
|
Exhaust gas temperature
|
≤45℃
|
Oil content (ppm)
|
≤3
|
Exhaust particle size (μm)
|
≤3
|
Cooling method
|
Water cooling/Air cooling
|
Noise sound pressure level
|
≤85dB(A)
|
Power
|
30-400kw
|
Vibration intensity
|
≤28.0mm/s
|
Compressor service life
|
More than 25 years
|
Lubrication method
|
Cylinder: splash lubrication (if the exhaust pressure is lower than 10MPa, oil-free lubrication can be realized)
Crankshaft, connecting rod: pressure lubrication.
|
Process flow:
After being separated and filtered from the outside, the gas enters the first-stage air inlet of the compressor. After being compressed, it enters the first-stage cooler. After cooling, it enters the second-stage intake air. After being compressed, it enters the second-stage cooler. The gas pressure determines the number of compression stages. The gas needs to be cooled after each compression. After reaching the customer's required pressure, the gas is discharged from the end cooler.
Applications:
This type of equipment is widely used in food, medicine, oil field, chemical and other industries.Especially in the nitrogen industry, this type of equipment produced by our company is widely used.