Natural gas dewatering plant

Categories

how can we help you

how can we help you
You can contact us any way that is convenient for you. We are available 24/7 via email or telephone.
Contact us
  • Product Detail

Description:

After the natural gas passes through the pre-filter to remove dust and water, in the adsorption tower, the water in the natural gas is adsorbed by the adsorbent in the low temperature super water absorption characteristic, and then the natural gas is purified through the post-filter to remove dust. When the adsorbents in one tower reach adsorption saturation, it is necessary to desorption (regeneration) , at this time, switch to another tower for adsorption; a small amount of purified natural gas is pressurized through a circulating fan, and the moisture in the regeneration tower is carried out from the tower body by high temperature gas, after cooling and separating water, the utility model enters into an adsorption tower to achieve the goal of regeneration without consuming gas.


1. Double-tower structure, low pressure fluctuation, low noise, safe and efficient 
2. The whole machine can realize semi-automatic and full-automatic operation with low failure rate. 
3. The dewpoint detection interface can be reserved for on-line monitoring.
4. Preset multi-level security measures, automatic alarm shutdown 
5. Be Able to carry out related manufacturing according to User’s requirements


Application:

1. Suitable for large, medium and small flow 
2. It is recommended to be used in auto gas filling station with medium moisture content. 
3. Low, medium and high voltage design 
4. Vehicle gas drying, natural gas transmission pipeline station drying 
5. It’s working all the way



Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

    Tags :

Related products
RO device
OCRO
The OCRO membrane module subversively overcomes the requirement of the traditional roll-type reverse osmosis membrane for the inlet water quality. Restriction can greatly simplify the influent pretreatment process, and the average service life of the membrane is as long as 3-5 years.
Boring Machining Center
CNC Gantry Milling Boring Machining Center
Numerical control gantry is widely used in aviation, automobile, precision mold and parts processing industry, providing a highly reliable mechanical system and a variety of selective and easy-to-operate software interfaces. The machine tool adopts a gantry fixed beam frame structure, which has good rigidity and precision retention. The best living shaft configuration, the spindle center line is close to the Z-axis guide, which greatly reduces the bending deformation caused by the influence of thermal deformation and the cutting torque, and ensures the best accuracy. The Z-axis feed design adopts double-cylinder counterweights to balance the position close to the center of gravity of the movement. The optimal configuration of the drive screw and the spindle motor center can eliminate the unbalanced torque. The saddle is equipped with an adjustable gap pressure plate, which is beneficial to improve the positioning accuracy. The main shaft adopts oil-cooled circulation cooling to ensure the high precision of the main shaft. It adopts timing and quantitative automatic lubrication device, which has low abrasion and is suitable for long-time operation requirements.
Multistage centrifugal pump -EBOOMYA
Multistage centrifugal pump
Multistage centrifugal pump is the core equipment of LNG supercharging.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
top

Home

products

about

contact